DIY Car Repair and Test Tool
2017年 04月 13日
Here comes brand-new ALLSCANNER VXDIAG A3 3-in-1 diagnostic scanner for BMW, JLR and VW to fully replace BMW ICOM ISTA, JLR Mongoose Cable SDD and VAS 5054A ODIS! It supports DOIP protocol for latest BMW F Series, Jaguar,Land rover and Volkswagen cars!
What’s new about VXDIAG A3 Multi Diagnostic Tool for BMW?
ALLSCANNER VXDIAG A3 can fully replace BMW ICOM A1, A2 and A3!
- VXDIAG A3 support all BMW E, F, G series diagnosis, programming and coding.
- You can run VXDIAG A3 with all BMW programming and diagnostic software like ISTA-D, ISTA-P, E-Sys, INPA, WINKFP, Tool32, NCS-Expert tool, etc.
- You can use VXDIAG A3 to do many BMW personalized setting and activate hidden features on your bmw.
1.VXDIAG A3 for BMW function introduction
The new BMW software can perform programming and coding for all BMW E/ F/ G series cars. Same as BMW ICOM A1 / A2 / A3, ALLSCANNER VXDIAG A3 supports all BMW software and is good at fiber programming.
The main diagnostic software includes:
BMW software version: Diagnosis: ISTA-D v40.01.21, Programming: ISTA-P v3.59.4.004
BMW ISTA-D (Diagnostic);BMW ISTA-P (Programming)BMW Group ISPI
(the fourth generation of BMW diagnostic software client);E-SYS
(Engineer Software for F series, available for programming, coding, Customization, realize hidden functions, advanced features);WINKFP
(for E series: programming, upgrade and downgrade);Ediabas Tool32
(enter key, import codes, delete certification, advanced features of BMW series);INPA
(read vehicle information, diagnosis, read and clear trouble codes);BMW Coding
(for E series: import data, change the code or realize hidden functions);KSD2
(offer full vehicle repairing information for diagnosis or programming);NCS-Expert tool
(for E series: set codes, realize hidden functions and change settings);BMW software includes the engineer version, which is the quick and easy diagnostic programming and coding system that German BMW engineers are using. The system is designed in English and German. The Engineer version is so practical and powerful that it can achieve professional features which all the original professional computers can realize, can change the language into Chinese through the OBD port for import cars (Europe regulation cars, the United States and the United States, Africa, etc.). Features mainly include: diagnosis, programming (incl. programming one module only), coding, realize hidden function, new features activation, the module system update.
Following functions can be activated based on the existing configuration model:
01 use the button in the cab to close the trunk (electric tailgate), to terminate the reverse operation at any time (available in cars with the electric tailgate)
02 activate the Bluetooth phone function, to automatically play the music inside the phone every time you start the car. (Available in models with a USB port in the armrest box or gear)
03 support audio and video playback via USB cable as well as via iPod.
04 connect to the phone through the Wi-Fi (mobile phones are required to install software)
05 open the voice recognition function (currently only available in English digital telephone dialing)
06 operate the navigation menu when driving, watch DVD (Even the original car is available with CD, you can also watch DVD)
07 Active internet applications (available in post 2012.09 models with professional navigation, but some unsupported with unclear reasons)
08 immediately fold the rear-view mirror with the remote control (for the original car, owners need to press the lock key for 1.5 seconds)
09 activate gearbox program on the sport cars, at a quicker response for speeding up. But it will cause fault codes in ECU test in the 4S shop. (NOT recommended)
10 effectively prevent rear-end collision because brake lights flash quickly when braking severely (for 3 Series 5 Series, testing)
11 use mobile phone traffic to surf the Internet on iDrive via the phone Bluetooth (not tested yet)
12 adjust the warning speed of changing a lane (available in high-end cars with the rearview mirror with the dead angle warning indicator) (not tested yet)
13 automatically released the handbrake (parking button) when the vehicle is started (testing)
14 add the lane departure system and roadside warning identification function (available in optional cars with front cameras) (not tested yet)
15 L7 around Sound Pro
1. Set Seat Belt Alarm time (second/sec)
2. Disable passenger Seat Belt Alarm
3. Disable driver Seat Belt Alarm
4. Set the engine on/off status the same as that before the ignition off or the default status off.
5. Set the central lock automatically unlock when ignition off
6. Set Fuel Economy Mode as default mode after ignition on
7. Enable roll up window when open car door
8. Enable the option of DRL (Day Running Lights) on or off.
9. Set Highlight auxiliary and intersection traffic light “Automatic”
10. Enable to adjust DRL brightness (the default factory setting is brightest)
11. Set fog light turn on while headlight is on
12. Enable to Lock/Unlock sound and adjust the volume
13. Enable auto close sunroof when raining (May lead to initialize sunroof, it will work only after ignition on for 10 seconds, not very effective.)
14. Set windshield wiper Back in place when ignition off
15. Set sunroof automatically close in a tilted state (It needs to initialize sunroof)
16. Set the turn signal light on/off times (F30)
17. Enable CIC menu display CI version
18. Three Bluetooth phone rings available
19. Enlarge phone number and text storage (25 to 50)
A/C (Automatic Air Conditioning)
20. Set indoor internal circulation memory the same as that when the ignition off last time.
21. Set air conditioning memory the same as that when ignition off last time.
22. Display engine output power and torque on navigation screen
23. Cancel home screen boot delay confirm message
24. Cancel rear view camera statement when reversing
25. Display available gas station on navigation
26. Display speed limit info (Need hardware support)
27. Display engine torque menu
28. Auto headlight
30. Display tire pressure and temperature (Need hardware support)
31. Adjust mile to kilometer
33. GPS time synchronization
34. Dashboard stimulate instant fuel consumption: change from 20 to 30
35. Enable dashboard light on always
36. Enable dashboard light always on at night (For BMW 535, GT, 7 series and part of BMW 530)
37. Enable dashboard light always on at daytime (For BMW 535, GT, 7 series and part of BMW 530)
38. Enable dashboard lights turn grey (For BMW 535, GT, 7 series and part of BMW 530)
39. Enable dashboard lights turn orange or grey (For BMW 535, GT, 7 series and part of BMW 530)
40. DS Mode display current shift from S1 to S7
41. Set Head-Up Display (Navigation map distance and turn signal, etc.) (Need hardware support)
42 PDC reversing radar is changed vertically and horizontally
What’s new about ALLSCANNER VXDIAG A3 for Jaguar and Land Rover?
VXDIAG A3 with JLR IDS V148 can perform online programming, test, diagnosis and programming key with incode.
Note: For Range Rover Sport and Range Rover Executive 2014 and later, you can’t use the JLR Mangoose cable anymore because car protocol is changed! Or warning light on your dashboard!VXDIAG A3 will never have an issue!
For the 2014 Range Rover Executive Edition and new Range Rover Sports, since the communication protocol was changed, only ALLSCANNER VXDIAG A3 is verified to be able to diagnose. JLR Mangoose cable can’t cover any longer, if JLR Mangoose cable is plugged into the vehicle, all the dashboard warning lights will be on and lead to the vehicle malfunction; VCM can’t cover neither, although it can cover the newer Jaguar and Land Rover.
ALLSCANNER VXDIAG A3 JLR SDD language:
English / Japanese / Portuguese / Romanian / Korean / Dutch / Polish / Turkish / Spanish / French / Italian / Croatian / Danish / German / Swedish / Finnish / Slovenian / Czech / Russian / Greek / Chinese
Software functions: read live Data stream, actuation test, monitoring, utility testing, reprogramming, diagnostic trouble code.
1. J1850PWM / SCP
2. ISO9141 / KWP2000
4. Medium Speed CAN
5. CAN Bus (capable of ISO 15765, GMLAN, and ISO14229)
What’s new about VXDIAG A3 for VAG?
VXDIAG A3 for VW, Audi, Skoda, Bentley and Lamborghini support VAG ODIS 3.10 software and UDS protocol. VXDIAG A3 covers VAS 5054A functions!
VW function introduction:
Support the newest ODIS 3.10 software and UDS protocol.
Support Volkswagen, Audi, Skoda, Bentley, Lamborghini
ODIS language available:
System Requirements: Dual-core processor, better above I5; over 4G of memory
ALLSCANNER VXDIAG A3 PC Requirements:
4GB Memory + CPU I5 or above + 500GB HDD (Will come with package)
Note: It’s advised only use the 500GB HDD with one PC. If you change it to other PC, you may need to turn back HDD to copy again!
Check here to know more details and info about VXDIAG A3:
VXDIAG A3 for BMW, JLR and VW 3-in-1 ONLY $429!
Blog.obdii365.com All rights reserved, original post:VXDIAG A3 BMW JLR and VAG replace ICOM SDD and ODIS
2017年 03月 09日
I tried to install Bluetooth vas 5054a ODIS VAG diagnostic software on Windows 7 pro, when I launched OffBoardDaigLauncher, ODIS 3.0.3 gave me an error "Unable to determine hardware ID for this computer" and stuck at this procedure, what should I do?
Your computer or operating system is not compatible with the vas 5054 ODIS software. Please change computer or operating system, better Win7 32bit.
Here are the ODIS installation video guides for you.
2016年 08月 31日
I have installed the VAS-PC V19 software& driver and then connected VAS 5054A Bluetooth interface (with OKI chip) with vehicle, but the vas pc software failed to communicate with my car. It gave me some errors:
“Failure diagnostic bus
The diagnostic interface (VCI) is not
Please close the application and configure the diagnostic interface”
“Number of breakdown: 200.59
You can not set.
no communication with the control connected is mounted”
VAS-PC V19 is not compatible with your Windows XP operating system.
Please install our Windows XP SP3 operating system and then re-install VAS 5054 VAS-PC V19 software.
VAS PC V19 software for VAG VW/Audi/Skoda/Seat works on our WIN XP O/S ONLY.
2016年 08月 12日
Obd365.com is rolling out the VAS 5054A replacement—VAG CAN PRO VCP 5.5.1 diagnostic, coding and programming tool – run much faster and better than ODIS 3.0.3.
Windows XP or Windows 7
Processor: 700 Mhz or faster,
1 USB ports available.
Language: English, Czech, Danish, German, Hrvatski, Italian, Dutch, Polish, Russian, Spanish
Compatible device: VAG CAN Professional VCP scanner
Top reasons for VAG CAN PRO:
1. better and faster than VAS 5054A ODIS 3.0.3
2. supports diagnosis, offline coding and programming
3. No engineer codes required for coding or programming
4. Supports CAN BUS, UDS, K-line
How to install VAG CAN PRO VPC v5.5.1 on WinXP and Win7?
run and install WinRAR 5.31 in Computer/DVD Drive (E:) VCP6
copy Driver VCP folder to Desktop
For Windows XP users, please go to Computer management to select USB human interface device.
For Windows 7 users, select USB input device in Computer management, when USB input device installed (pop-up window)
device driver software was not successfully installed (pop-up window)
then select VCP for Update driver software
browse: Desktop/ Driver VCP
device driver software was not successfully installed (pop-up window)
then select USB serial port for Update driver software
browse: Desktop/ Driver VCP
successfully updated driver software
select USB serial port (COM4) and USB serial converter
then run vag can pro application on Desktop
VCP 5.5.1 supports CAN, K-Line, CAN->K-Line, K-Line->CAN
change the software language in setting options
VCP 5.5.1 supports ECUs: engine, gearbox, abs,a/c, airbag, instruments awd, immo, navi, steering assist, centr. conv. radio, and more
go to Engine, then connect
then go to additional function: guided function
2016年 08月 10日
“Do You have information about VCP (vag can pro)? Is it possible to find the clone of it? I need to change the eeprom in mmi.” A customer contact the our customer in year 2015. And VCP VAG CAN PRO clone finally rolled out in obdii365.com
But the clone VCP USB interface takes US$49.99 FREE SHIPPING.
What’s VAG CAN Pro?
VAG CAN PRO VCP (VAG CAN Professional)supports CAN BUS + UDS + K-Line for diagnostics and programming of electronic components used in vehicles Volkswagen, Audi, Seat, Skoda, made from 1990 to 2015. VAG CAN Pro can completely replaced VAS 5054A ODIS Bluetooth. Is better that VCDS in all aspects. It can do some things that VCDS can’t, OCF will make your life much easier, it takes time to understand how this software works, it still need some fixes, it sometimes gives you headache but it’s definitely worth to buy as second software for VAG after VCDS. It is very good tool for VAG and DGS flash.
Software version 5.5.1
Support for new addresses entered in the MLB-Evo platform
Update database-ODX (support for all models 2015)
is OEM, so it fully supports every VAG model, but it’s slow and you need online connection for being able to do a lot of things.
VCDS is super fast, best to read DTC’s and do basic stuff and some coding, but it doesn’t work well with new MQB platform.
VCP is little bit a mix of those, reads DTC fast, every feature is done offline, and work very well with MQB.
* Unique features OCLF service procedures (One-Click-Function);
* inexpensive flasher for VAG;
* inexpensive flasher with support UDS controllers;
* ESP MK60EC1 decision coding blocks;
* a tool for a complete diagnosis MQB platform (Golf VII, Octavia III) Support to 01.2013;
* ZDC-loading containers in the electronic components;
* Unlock video in motion (VIM) on the MQB platform (Discover Pro and MMI-MQB);
* Coding controllers for PR-codes;
* “Login finder” – allows you to scan and logins in the CAN controllers UDS;
* Support for the new Polo in 2014 Facelift;
* Support for the new Passat B8;
* Full support of Audi TT-3 on the platform of the IBC;
* Full support for Skoda Fabia III
Major changes in the PR encoder:
* Now it is possible to keep PR-codes of a file
* PR-self-sustaining encoder may select codes known PR-analysis of current data stored in the ECU
* You can compare the data stored in the ECU against the calculated data, choose what you want to download.
* OCF “Activating automatic folding mirrors”, the problem is illuminated space around the machine solved – Thanks Ciamardo / vcp-forum.de
* The new team in the Scripter: GetCardSerial, returns the current smart card number. You can use it to prepare a script that will run only on these smartcards.
* Enhanced TXT-coding, coding calculation is now faster APDUs.
* Updated data base DTC- Fixed problems with parameterization 7N0 cameras
* Fixed problems with parameterization 5M0 …… F AFS modules
* OCF new section called “Apps”, which is: Download the parameter data, coding for PR-code, programmer Wabco, BCM, and so forth programmer..
* The new procedure OCF “FlashFile Dumper” – can extract content from Flash files (* .SGO, * .FRF, * .ODX) in a binary dump. Note: The source data format is not changed, * so that if a Flash file kriptovat and compressed, the binary file will be the same.
* Fixed an issue in the Gateway Sheet MLB-EVO (B7 II, A4 B9) – not all ECU were available through the Gateway.
* Updated database of error codes (added more than 200 new codes, including the MQB / MLB-EVO platform)
* New Firmware v.1.1 for interfaces (04.0D / 02.04) v.2.0 (0A.04 / 0B.04) to support new protocols (TCP-IP) used on the MLB-EVO platform
* Fixed a connection problem with the address 46 (room unit) on the MLB-EVO (B9 A4 / Q7 4M) platform
* OCF Disable Start-Stop system is now supported PQ26 platform (Polo 6C, Fabia III, etc.)
* Reduced time delays during the loading of large data blocks in the non-flash modes.
This contributes to a more stable connection when connected directly to the ECU (Direct Connect), popular among fans VAG
A3 8P 2003-
A3 – platform MQB-
A4 model 8E wariant B7 (Engine, transmission, airbags, ABS, park) 2005-
A4 model 8K wariant B8 (UDS + TP2.0) 2008-
A5 model 8K (UDS) 2007-
A6 model 4F 2004-
A8 model 4E 2003-
Q3 (UDS) 2010-
Q5 (UDS) 2008-
Q7 (TP2.0 + UDS) 2006-
S5 model 8K
(R)S6 model 4F
TT model 8J 2007-
Sprinter (VW Crafter) – – Only the engine and immobilizer
Leon MQB 2013-
Leon model 1P 2005-
Toledo model 5P 2004-
Exeo 2008- (Engine, transmission, airbags, ABS, park)
octavia model 1Z 2004 –
octavia platform MQB –
superb II B6 2008-
fabia model 5J 2007-
Crafter (immobilizer, engine)
Caddy model 2K 2005-
Golf V model 1K
Golf VI model 5K
Golf VII platform MQB
Jetta II model 1K
Transporter / Multivan (Only after the CAN-BUS drive for storing data)
Multivan/Transporter GP model 7E (UDS) 2009-
Passat B6 model 3C 2005-
Phaeton GP 2007-
Polo model 6R 2009-
Polo FL MQB 2014-
Touareg GP 2007-
Touareg NF 2010
Notes for Audi A4
1. Option A4 8E B6 model
This model has a can-bus (TP1.6), but it is not connected to the diagnostic socket. The car is fully diagnosed on the K-line (VCP required interface + K). Used protocols KWP2000 and KWP1281 it.
2 .Model A4 8E, B7 option
This model has a CAN BUS TP2.0, but the diagnostic socket is only connected to the so-called CAN-Antrieb, i.e. Engine, transmission, airbags, ABS, Quattro drive.
In addition, a standard K-line. In other words, VCP USB interface fully supports the diagnosis B7 models, but only in the CAN-Antrieb. Other controllers are available through the K-Line and KWP2000 KWP1281 protocols.
2016年 07月 26日
Here is the step by step installation guide of VAS 5054a VAS-PC V19.01.01 diagnostic software for VAG group VW Audi Skoda Seat.
1. Start with a clean install of Windows XP SP3
2. Install Java 18.104.22.168 (attached the install file in this post)
3. Restart PC and if you are not installing VAS-PC in a Virtual PC, install virtual drive software like DAEMON tools
4. Go to control panel---->Java Plug-in---->Click on update tab---->UN-Check 'check for updates automatically'---->click Apply and then close it.
4. Mount the VAS-PC 19.01.01 Base CD and start installation
5. After installation completes, restart PC
6. Run the VAS-PC Hotfix for v.19.01.01
7. In the desktop open the shortcut for 'Configurator' - In that, click 'Java Settings' ---> In the 'JVM' box, it should show '1.4' - close the program.
8. Open VAS-PC from shortcut in the desktop. It should load and then close.
9. Go to C:\SIDIS\home and open the 'label' file with Notepad and change the 'period' value to some date in the future, for ex. period=26/04/2016 - this is done to prevent the 'out of date' errors in VAS-PC. Save the file and close it.
10. Open VAS-PC from desktop shortcut--->click on Administration--->Enter workshop code
Now it will ask for Distribution Center/Importer No. - enter any 3 digit number in the numpad and click Q on the on-screen numpad
Now it will ask for Dealership Number - enter a 5 digit number on the numpad and click Q on the on-screen numpad
Now it will ask for dealership identifier - Enter a name and click Q on the on screen Keyboard twice.
11. Close VAS-PC.
12. Go to start menu--->Run--->type 'regedit' (without the quotes) and press enter
13. Go to HKEY_LOCAL_MACHINE\SOFTWARE\SIDIS\ENV and find the registry entry "THE_REAL_CDROOT" - this entry contains the CD drive letter that VAS-PC uses for installing brand CDs - Right click this entry ---> Modify---> then change value to the drive letter of the CD drive you are going to use to install the Brand CDs. If you are using a virtual drive, change this value to the virtual drive's drive letter. After changing the value, click OK and close the registry editor.
14. Mount a Brand CD (VW/Skoda/Audi/Seat/Bently) and open VAS-PC.
15. Click on 'Administration'--->'Install/Update CD'---> It will ask whether to install update, click OK ---> now brand CD will install.
16. Repeat steps 14 and 15 to install the rest of the brand CDs.
2016年 05月 17日
Customer complaints of VAS 5054a odis VAG diagnostic scan tool “vas-pc ADM.exe -unable to locate component” and solution is provided.
Every time I open vas-pc, i met the same problem vas-pc ADM.exe -unable to locate component. this application has failed to start because upcEpc.dll was not found. i use hot fix by patrian 19.01.01.
VAS-PC: ADM.exe -Errrur systeme
Impossible de demarrer le programme car il manque UspEpc.dll sur votre ordinateur. Essayez de reinstaller le programme pour carrige ce probleme.
VAS-PC: ADM.exe – Unable to locate component
The application has failed to start because UspEpc.dll was not found. Re-install the application may fix this problem.
Optional solution shared by VAS 5054 users:
—PC blocks updates for windows; just install 126 updates to fix the problem
–Copy UspEpc Api onto c:\Program Files：
Give it a try and good luck
–find the virus in the PC and try to fix it
Solutions above may be risky to try. You are at your own risk.
2016年 04月 23日
Some 5054a users complaint that their VAS 5054A ODIS update interface always pops up, and here is the useful solution to turn off the update sreen, which works for ODIS 3.01 or ODIS 2.2.4.
Update – Invoeren van configuratiegegevens
Met de update kunt u de onderdelen van het
(Update – Entering configuration data
The update allows the components of the
Understandable solutions here offered by experienced users:
make folder like this: “c:\PostSetup\Odis\Trade-Retail\Software\Update\”
now put the file “site.xml” from PostSetup in the update folder
now in ODIS, go to Admin – Verbindungen – Mirror Server 2 – Mirror Server URL you must write “file:/C:/PostSetup”
When ODIS now check for Update no avaible
With every Update like the 6.50.20, you must copy the new site.xml to update folder.
Works 100% with ODIS 2.24 and also works very good with odis 3.0.1 and 3.0.2.
2016年 02月 22日
Bluetooth vas 5054a ODIS (Offboard Diagnostic Information System) is newly released to V3.0.1+PostSetup 9.0.10 in obdii365.com.
The ODIS software is the program that provides you with an interface that complies with SAE J2534 (diagnostic interface). This software enables you to diagnose all Volkswagen, Audi, Skoda, Seat, Bentley and Lamborghini brand vehicles.
Furthermore, you have access to the following information during the vehicle diagnosis:
– Vehicle data
– Workshop Manuals
– Circuit diagrams
– Field measures
– Technical product information
This information is exclusively available within the diagnostics software during an active diagnostics session.
Software version: V3.0.1
Operating system: Windows 7 professional (NO WIN XP!!!)
English/ Japanese/ Portuguese/ Romanian/ Korean/ Dutch/ Polish/ Turkish/ Spanish/ French/ Italian/ Croatian/ Danish/ German/ Swedish/ Finnish/ Slovenian/ Czech/ Russian/ Greek/ Chinese
Tips: The ODIS 3.0.1 will automatically detect your computer system language. If your system is in English,the software installed will display in English. If your system is in Japanese,the ODIS software on your system will be in Japanese. One system,one language.
ODIS 3.0.1 Compatible China clone VAS 5054 interface:
VAS5054a Bluetooth for VW/Audi/Skoda/Seat (SP33)
VAS 5054A ODIS Bluetooth with OKI Chip (SP33-C)
Best Price VAS 5054 ODIS with OKI Chip and Bluetooth(SP33-BO)
VAS 5054A ODIS Bluetooth Diagnostic Tool (SP33-B)
Customer share torrent:
ODIS 3.0.1 VMware on torrent
Customer tested results:
1. confirmed, it works with vas5054a clone with OKI chip, thank you very much !!! excellent work!!!! I was tested with a 2016 vw golf mk7
2. I also tested it with 5054A with OKI. It works.
I had to disable the USB3.0 to and set it to USB 2.0 to have the VAS seen by the ODIS.
If you need our official torrent,please contact obd365.com customer service. If you had problem in installing ODIS 3.0.1 on your Windows 7 system,please install our Win 7 system.