DIY Car Repair and Test Tool
2017年 04月 20日
Free download VCM2 IDS software Ford v105.01 MAZDA v104.01:
FORD IDS 105.01 with Ford VCM2 Manager 188.8.131.52
MAZDA IDS 104.01 with Ford VCM2 Manager 184.108.40.206
VCM I clone….. Some worked, some not!
Ford VCM2 original…..Confirmed!
Allscanner VCX Brand: Vxdiag VCX Nano for Ford/Mazda…..Confirmed!
(tested with the latest vcx manager and updated firmware on the nano => work great with my vcx nano)
IMPORTANT NOTE: ford ids v105 & mazda ids 104 has not tested by professionals. Just copy here for sharing. You may take a risk when using it.
For sake of security, a tested version should be better for use-
Ford IDS V101 Mazda IDS v99: no issues with Ford vcm2 clone
Ford IDS V101 Mazda IDS v104: no issues with vxdiag vcx nano for Ford and Mazda
SCOTT (Thank you so much bro, SERIOUSLY! ) & technicians working for obdii365.com
(Thanks for the test reports)
2017年 04月 19日
Got my MINI VCI Toyota TIS Techstream (10.30.029) cable and software working on Windows 8 64-bit laptop. Here’s what I did.
- I ordered this cable/software from obdii365.com. Was $16.99 with slow boat shipping, took 1.5 weeks to get.
- Load this page since I used this for most of my steps, Techstream TIS VCI Installation Guide (64-bit OS) Including All Software Needed! – Scion FR-S Forum | Subaru BRZ Forum | Toyota 86 GT 86 Forum | AS1 Forum – FT86CLUB
- First thing you need to do is install the driver for the USB/OBDII cable. Follow the steps outlined in “Installing MVCI Driver for TOYOTA” of the ft86club post. I used the “Mini VCI Driver for TOYOTA.msi” in the 10.30.029 folder that came on the CD.
- After drivers are properly installed and you verify you can see the device connected on the XHorse Firmware Update Tool, you’re GTG
- Next up is the Toyota Techstream software, from the included CD I ran the “Toyota Techstream 10.30.029.exe”. After installation I went into the C:\Program Files (x86)\Toyota Diagnostics\Techstream\bin folder and replaced the “MainMenu.exe” file with the one found on the CD.
- You should be able to load up the Techstream link that was installed on your desktop. When it asks to register with a new key, use the key found in the “serie.txt” on the CD.
- Next you’ll need to update your registry, on the ft86club post there’s a Dropbox link and with a “mvci-x64.reg” file, download this and run it.
- Open up Techstream, go to Setup menu, VIM Select, and choose the XHorse – MVCI. This will have Techstream use the XHorse MVCI cable.
- If you try to Connect to Vehicle you’ll get a message that forces you to update the software. To get around this disable your internet connection (turn off wifi and/or unplug your ethernet cable). Now you can start and use Techstream without the force update check.
- When you connect there’s a counter in Techstream that only allows 30 connections to your car without an internet connection. To get around this go to the C:\Program Files (x86)\Toyota Diagnostics\Techstream\Env folder and open the “IT3UserCustom.ini” file. Towards the bottom there’s a “ConnectionCount” variable, just update this to 1 when you get close to 30 connections.
This worked for me… hopefully this will save everyone some time/hassle. I would be careful of what you try to update in Techstream. I just updated the unlock so a single press will unlock all the doors. I also viewed some data on the TPMS stuff.
2017年 04月 17日
04.12.2017 newly released Ford IDS 105.01 is now available:Below you can free download Ford IDS V105.01 VMWare with VCM II Manager for Ford VCM II clone and VXDIAG VCX NANO for Ford/Mazda! Ford IDS V105.01 with VCM II Manager 220.127.116.11 Download Part 1:https://mega.nz/#!l1UVBCLa!w1Out18LqVP3QIboAfa3YCmF6z6bF8W1Tb2vt8Pily0Ford IDS V105.01 with VCM II Manager 18.104.22.168 Download Part 2:https://mega.nz/#!519CwI5I!V57SrxIcMAtp87lg3iv-zDKU0Ueu8T5jPBc9sdUg-5gPassword: nK6gE84Thanks SCOTT and MHH forum!Enjoy at your own risk!Ford IDS V105.01 Compatible Interfaces:Ford/Mazda VCM II 2-in-1 Diagnostic Scan ToolFord VCM2 PCBVXDIAG VCX NANO for Ford and MazdaFord IDS V105.01 Update Information:Support WINDOWS 7, WINDOWS 8, WINDOWS 10This version has the ability to download the very latest calibration software files from Ford’s server if you have an internet connection available at the time of connecting to vehiclesReading and decoding fault codesDeleting fault codesDisplays system current parameters in digital formCombined displaying of dataLogs keeping - writing and keeping of digital parameters in memorySpecial function: changing of permissible settings of blocks, programming etc.
Ford IDS V105.01 FAQ:Q: Is this Ford IDS 105.01 work with VCM II Clone?A: Some yes! It works with VCM II clone that can use VCI MANAGER 22.214.171.124 and above.Q: Thanks for sharing but after I download, there is no active license?A: When you open VM at first time, choose “I move it” and all will be OK!Q: Is the internet not supposed to work? When I start the VMWare, it said that some settings were changed. I restarted and the license was lost. So I reinstalled it again, still no internet but the license is working now?A: Go to “Devices”, choose “Network Adapter NAT” and check the box “Connect at power on”. Look at picture below:
2017年 04月 13日
Here comes brand-new ALLSCANNER VXDIAG A3 3-in-1 diagnostic scanner for BMW, JLR and VW to fully replace BMW ICOM ISTA, JLR Mongoose Cable SDD and VAS 5054A ODIS! It supports DOIP protocol for latest BMW F Series, Jaguar,Land rover and Volkswagen cars!
What’s new about VXDIAG A3 Multi Diagnostic Tool for BMW?
ALLSCANNER VXDIAG A3 can fully replace BMW ICOM A1, A2 and A3!
- VXDIAG A3 support all BMW E, F, G series diagnosis, programming and coding.
- You can run VXDIAG A3 with all BMW programming and diagnostic software like ISTA-D, ISTA-P, E-Sys, INPA, WINKFP, Tool32, NCS-Expert tool, etc.
- You can use VXDIAG A3 to do many BMW personalized setting and activate hidden features on your bmw.
1.VXDIAG A3 for BMW function introduction
The new BMW software can perform programming and coding for all BMW E/ F/ G series cars. Same as BMW ICOM A1 / A2 / A3, ALLSCANNER VXDIAG A3 supports all BMW software and is good at fiber programming.
The main diagnostic software includes:
BMW software version: Diagnosis: ISTA-D v40.01.21, Programming: ISTA-P v3.59.4.004
BMW ISTA-D (Diagnostic);BMW ISTA-P (Programming)BMW Group ISPI
(the fourth generation of BMW diagnostic software client);E-SYS
(Engineer Software for F series, available for programming, coding, Customization, realize hidden functions, advanced features);WINKFP
(for E series: programming, upgrade and downgrade);Ediabas Tool32
(enter key, import codes, delete certification, advanced features of BMW series);INPA
(read vehicle information, diagnosis, read and clear trouble codes);BMW Coding
(for E series: import data, change the code or realize hidden functions);KSD2
(offer full vehicle repairing information for diagnosis or programming);NCS-Expert tool
(for E series: set codes, realize hidden functions and change settings);BMW software includes the engineer version, which is the quick and easy diagnostic programming and coding system that German BMW engineers are using. The system is designed in English and German. The Engineer version is so practical and powerful that it can achieve professional features which all the original professional computers can realize, can change the language into Chinese through the OBD port for import cars (Europe regulation cars, the United States and the United States, Africa, etc.). Features mainly include: diagnosis, programming (incl. programming one module only), coding, realize hidden function, new features activation, the module system update.
Following functions can be activated based on the existing configuration model:
01 use the button in the cab to close the trunk (electric tailgate), to terminate the reverse operation at any time (available in cars with the electric tailgate)
02 activate the Bluetooth phone function, to automatically play the music inside the phone every time you start the car. (Available in models with a USB port in the armrest box or gear)
03 support audio and video playback via USB cable as well as via iPod.
04 connect to the phone through the Wi-Fi (mobile phones are required to install software)
05 open the voice recognition function (currently only available in English digital telephone dialing)
06 operate the navigation menu when driving, watch DVD (Even the original car is available with CD, you can also watch DVD)
07 Active internet applications (available in post 2012.09 models with professional navigation, but some unsupported with unclear reasons)
08 immediately fold the rear-view mirror with the remote control (for the original car, owners need to press the lock key for 1.5 seconds)
09 activate gearbox program on the sport cars, at a quicker response for speeding up. But it will cause fault codes in ECU test in the 4S shop. (NOT recommended)
10 effectively prevent rear-end collision because brake lights flash quickly when braking severely (for 3 Series 5 Series, testing)
11 use mobile phone traffic to surf the Internet on iDrive via the phone Bluetooth (not tested yet)
12 adjust the warning speed of changing a lane (available in high-end cars with the rearview mirror with the dead angle warning indicator) (not tested yet)
13 automatically released the handbrake (parking button) when the vehicle is started (testing)
14 add the lane departure system and roadside warning identification function (available in optional cars with front cameras) (not tested yet)
15 L7 around Sound Pro
1. Set Seat Belt Alarm time (second/sec)
2. Disable passenger Seat Belt Alarm
3. Disable driver Seat Belt Alarm
4. Set the engine on/off status the same as that before the ignition off or the default status off.
5. Set the central lock automatically unlock when ignition off
6. Set Fuel Economy Mode as default mode after ignition on
7. Enable roll up window when open car door
8. Enable the option of DRL (Day Running Lights) on or off.
9. Set Highlight auxiliary and intersection traffic light “Automatic”
10. Enable to adjust DRL brightness (the default factory setting is brightest)
11. Set fog light turn on while headlight is on
12. Enable to Lock/Unlock sound and adjust the volume
13. Enable auto close sunroof when raining (May lead to initialize sunroof, it will work only after ignition on for 10 seconds, not very effective.)
14. Set windshield wiper Back in place when ignition off
15. Set sunroof automatically close in a tilted state (It needs to initialize sunroof)
16. Set the turn signal light on/off times (F30)
17. Enable CIC menu display CI version
18. Three Bluetooth phone rings available
19. Enlarge phone number and text storage (25 to 50)
A/C (Automatic Air Conditioning)
20. Set indoor internal circulation memory the same as that when the ignition off last time.
21. Set air conditioning memory the same as that when ignition off last time.
22. Display engine output power and torque on navigation screen
23. Cancel home screen boot delay confirm message
24. Cancel rear view camera statement when reversing
25. Display available gas station on navigation
26. Display speed limit info (Need hardware support)
27. Display engine torque menu
28. Auto headlight
30. Display tire pressure and temperature (Need hardware support)
31. Adjust mile to kilometer
33. GPS time synchronization
34. Dashboard stimulate instant fuel consumption: change from 20 to 30
35. Enable dashboard light on always
36. Enable dashboard light always on at night (For BMW 535, GT, 7 series and part of BMW 530)
37. Enable dashboard light always on at daytime (For BMW 535, GT, 7 series and part of BMW 530)
38. Enable dashboard lights turn grey (For BMW 535, GT, 7 series and part of BMW 530)
39. Enable dashboard lights turn orange or grey (For BMW 535, GT, 7 series and part of BMW 530)
40. DS Mode display current shift from S1 to S7
41. Set Head-Up Display (Navigation map distance and turn signal, etc.) (Need hardware support)
42 PDC reversing radar is changed vertically and horizontally
What’s new about ALLSCANNER VXDIAG A3 for Jaguar and Land Rover?
VXDIAG A3 with JLR IDS V148 can perform online programming, test, diagnosis and programming key with incode.
Note: For Range Rover Sport and Range Rover Executive 2014 and later, you can’t use the JLR Mangoose cable anymore because car protocol is changed! Or warning light on your dashboard!VXDIAG A3 will never have an issue!
For the 2014 Range Rover Executive Edition and new Range Rover Sports, since the communication protocol was changed, only ALLSCANNER VXDIAG A3 is verified to be able to diagnose. JLR Mangoose cable can’t cover any longer, if JLR Mangoose cable is plugged into the vehicle, all the dashboard warning lights will be on and lead to the vehicle malfunction; VCM can’t cover neither, although it can cover the newer Jaguar and Land Rover.
ALLSCANNER VXDIAG A3 JLR SDD language:
English / Japanese / Portuguese / Romanian / Korean / Dutch / Polish / Turkish / Spanish / French / Italian / Croatian / Danish / German / Swedish / Finnish / Slovenian / Czech / Russian / Greek / Chinese
Software functions: read live Data stream, actuation test, monitoring, utility testing, reprogramming, diagnostic trouble code.
1. J1850PWM / SCP
2. ISO9141 / KWP2000
4. Medium Speed CAN
5. CAN Bus (capable of ISO 15765, GMLAN, and ISO14229)
What’s new about VXDIAG A3 for VAG?
VXDIAG A3 for VW, Audi, Skoda, Bentley and Lamborghini support VAG ODIS 3.10 software and UDS protocol. VXDIAG A3 covers VAS 5054A functions!
VW function introduction:
Support the newest ODIS 3.10 software and UDS protocol.
Support Volkswagen, Audi, Skoda, Bentley, Lamborghini
ODIS language available:
System Requirements: Dual-core processor, better above I5; over 4G of memory
ALLSCANNER VXDIAG A3 PC Requirements:
4GB Memory + CPU I5 or above + 500GB HDD (Will come with package)
Note: It’s advised only use the 500GB HDD with one PC. If you change it to other PC, you may need to turn back HDD to copy again!
Check here to know more details and info about VXDIAG A3:
VXDIAG A3 for BMW, JLR and VW 3-in-1 ONLY $429!
Blog.obdii365.com All rights reserved, original post:VXDIAG A3 BMW JLR and VAG replace ICOM SDD and ODIS
2017年 04月 07日
The newest Toyota Techstream software v12.00.127 is verified to work 100% with the MINI VCI
cable, Xhorse MVCI
,VXDIAG VCX NANO for Toyota
, Toyota OTC 2 diagnostic tool. So, Techstream 12.00.127 Windows 7 / Windows XP, how to install? Here are the Tis Techstream 12.00.127 installation demos and step-by-step installation guides of.
How to install Toyota Techstream 12.00.127 on Windows 7
Operation system: Windows 7 (Windows XP also no issues)
Install Toyota Techstream V12.00.127 for MINI VCI/Xhorse MVCI:
Go to disk E: toyota mangoose
Open GTS_12.00.127_TME_NDSI application
Choose the Techstream setup language
Begin to install Techstream software
Accept the agreement
Enter the name and company
Techstream software is configuring your new software installation…
Click on Finish
Successfully installed Techstream 12.00.127 software!
Copy MainMenu application
Go to Techstream properties
Open File Location:…Program files/Toyota diagnostics/Techstream/bin
Copy and replace MainMen
Run MVCI Driver for TOYOTA to install (it’s in disk E:)
Begin to install MVCI driver
Installing MVCI driver for toyota tis…
Finish MVCI driver installation
Pop-up: instilling device driver software
Pop-up: your device is ready to use
Run MVCI Firmware Update Tool on Desktop
Run Techstream on Desktop
Pop-up: Java can be obtained from the web? NO!
Go to Setup->Techstream Configuration
Select Area: Europe, Language: English,
Connect to Vehicle
Enter the new key with the help of “key” text in software disk:
Initializing USB communication
Connecting to vehicle…
Techstream 12.00.127 diagnose VIOS ok
This how-to’s is for users with MINI VCI, MVCI 3 in 1
For users with Toyota OTC2 diagnostic tool , please refer the video below:
How to install Techstream v12.00.127 for Toyota OTC2Only differs from the driver installation!
2017年 03月 31日
If your Autel MaxiSys Pro MS908P
diagnostic scanner global version
comes with Spanish in default, you can follow obdii365.com guide to switch language from Spanish to English.
But if your Autel MaxiSys (MS905,MS906,MS908 Mini, MS908P) comes with English, you have to pay US$100 if you need to change English to other language (Please provide your language region as well).
- First of all, the language of the Android Tablet need to switch from Spanish to English.
Double check System setting —- language —-English
- The language of Diagnostic Program need to change.
To change the language from Spanish to English.
Step 2: Click on “Settings”.
Step 3: Click on “ Language”
Step 4: Select “ English”
Then you can see that the Autel MS908P
language is in English now.
After changing language to English and if you found it is blank here(Maxisys—Diagnostic).
Please go to Update and select vehicles software and reload them.
If you have any other question about Autel serial scanner, please contact us via email@example.com
2017年 03月 30日
It is a good code reader for DIYer. Easy operate on the Android or IOS devices, which allowed you to check your car at any time.
Recently, we received feedback from our customer regarding the device can not connect with iphone via Bluetooth. We finally help him solve the problem.
Here is the solution:
- Click the setting button:
It will show”Connection successfully”
Back to the main menu, and click “Diagnostic”
Click “Live data”
Select all, and click “Done”
By doing the above steps, the Bluetooth connection issue was solved easily.
2017年 03月 22日
What's the difference between Launch X431 V 8 inch tablet diagnostic scanner and Autocom/Delphi scanner clone?
1) Launch X431 V 8" is compatible with Android tablet and` phone, it is handheld and no bother installing driver and program.
Cracked Autocom/Delphi Ds150e is windows-based and need to install driver.
2) About function (Special function):
Autocom/Delphi Ds150e Clone is with normal function, A LOT OF SPECIAL function DOES NOT EXIST OR DOES NOT WORK.
Launch X431 V 8" covers full range car models and perform full car system diagnosis include: Read DTCs, Clear DTCs, Read data stream.
X431 V 8 inch includes more special functions incl. Oil Reset Service, Steering Angle Calibration, Electronic Parking Brake Reset, Battery Register / Battery Maintenance, ABS Bleeding, Electronic Throttle Position Reset / Learn, Diesel Particulate Filter (DPF) Regeneration, Tire Pressure Monitor System Reset, specifically, BMW idle study, BMW injection rate adjustment, BMW battery replacement, Nissan matching key, Renault – airbags coding ON/OFF, like on Clip tool.
Programming: some models support online programming.
3) About database:
In short I suggest buy original launch X431 V 8 inch for 799$ and you will have best solution because of the price of what you pay.
The only way that you have that big database and functions is to buy original software from Delphi, autocom or wurth, because there is no new version than 2014.03V.
And Launch X431 V haves far more than Delphi and others because launch you can have with 2016 database and even 2017 database for Ford and Mazda incl. Escape, MKC, Fusion, MKZ, Expedition, Navigator, Transit Connect, Explorer, Transit Connect, Super Duty, F150 etc. and believe me it is big difference.
3) About vehicle coverage:
X431 V is much better in model coverage for old Asia (10+ years, basicly Autocom/Delphi will never support this models good+Asia adapters was never developed) and sometime better functions for new Asia (younger than 10 years, this models are included in AC/D). About European brands are both tools perfect.
3) About after-sale service
Launch X431 V 8": Tap the "Remote Diagnosis" option and through CC number no need TV, you could gain instant messaging and remote diagnosis.
Autocom/Delphi users usually use Team viewer (TV) to get remote assistance by supplier.
4) About Update:
Launch X431 V 8" update is free for the first two years and upgrade every one month.
Autocom/Delphi Ds150e Clone is no new version than 2014.03V for long time.
5) About legalization
If you want it legal, then you can buy Launch X431 V 8 inch, it has the same functions like X431 V 7", run faster than 7" since it has better configuration.
6) About language available
Launch X431 V 8" language available: English, German, Japanese, Russian, French, Korea, Arabic, Spanish, Italy, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Persian, Romanian, Serbian, Finnish, Swedish and Czech.
Autocom/Delphi Ds150e Clone language available: English, Spanish, French, Italian, Portuguese, Czech, Dansk, German, Turkish, Greek, Dutch, Hungarian, Norwegian, Polish, Romanian, Russian, Serbian, Swedish.
It all depends what do you need and do you really have to have it software + interface genuine, if yes then I recommend Delphi if you are new to diagnostic world, but if you need original interface and to buy license for launch separately then I would choose launch, because it will cost you a lot cheaper.
Here Launch X431 V 8" full package
2017年 03月 17日
BMW F-series Zeitkriterium or manufacturing date is an important part of most retrofits that enables the use of BMW ENET cable E-sys to recode a module in order to activate the retrofit.
For example some F10 models came with halogen lights and most owners want to retrofit the LCI xenon headlights for better looks and visibility. The DRL is also very weak on halogen headlights and that ruins the way the car looks compared to the xenon equipped ones.
In this tutorial we will show you how to do it step by step.
Connect to e-sys F-series coding software and choose your chassis
Read FA and activate FA
Click on Save and give the file any name you wish, then click on Edit. Right click on the FA and click Calculate FP.
Edit the Zeitkriterium value accordingly to your needs
Calculate FP again then save
Go to the VCM tab, load the file and calculate FP again
Select VCM Master and Write FA FP
Now that the FA FP has been written to the car you can go ahead and recode your module by going back to the Expert Mode Coding tab, Read SVT to see the modules list, right click on the module name (Ex: FRM) and click on “Code”. Wait for the process to finish and you`re done!
2017年 03月 10日
Nissan Consult 3 Plus diagnostic and programming software update to V65.12 on obdii365.com
Free download Nissan Consult 3 plus v65.12 on Mega
only work on Windows XP(SP2 or later); cannot work on VISTA
1.Nissan Consult-3 Plus Software Version : V65.12 ；
2.Nissan Consult-3 Plus CSP Software Version : CSP V41.10 ；
3.Nissan Consult III Plus Programming Data Version : Pplus_V65.1F ；
Nissan Consult 3+ features:
No need password
Tested OK by professionals
Safe to use
11 languages available:
- English 2. Finnish 3. French 4. German 5. Greek 6. Italian 7. Japanese 8. Spanish 9. Chinese(Traditional) 10. Chinese(Simplified) 11. Russian 12. Portuguese 13. Turkish 14. Thai 15. Czech 16. Polish
Nissan Consult 3 Plus is the newest Nissan diagnostic tool, based on a wireless platform provides completed diagnosis and service information.
Nissan Consult 3+ can support all the models of the Nissan and Infiniti from 1996 up till now, incl. Nissan 2011 MY LEAF Quest and Murano CrossCabriolet, super racing MY GT-R and 2012 of NV and 2012 MY Infiniti M and M Hybrid
v65.12 Nissan consult 3 plus car list:
1.all nissan car , infiniti car and nissan gtr car to 2017.
2. New cars with obd-16 connector
Old cars with 14 pin connector
3. nissan electromobiles such as Leaf
4. all Renault
Note: you need different cards for different cars and functions